资源类型

期刊论文 272

会议视频 1

年份

2023 19

2022 29

2021 28

2020 24

2019 21

2018 13

2017 13

2016 15

2015 8

2014 9

2013 11

2012 13

2011 9

2010 8

2009 11

2008 13

2007 13

2006 2

2005 3

2003 2

展开 ︾

关键词

力学性能 6

严格雪崩准则 2

机械性能 2

自相关函数 2

Al2O3-MxOy 1

CFRP索斜拉桥 1

Chrestenson谱 1

DNA结构 1

FRP 聚合物 1

GDM过滤技术 1

HDPE 1

Nd-YAG 1

PEDOT:PSS 1

PP 1

Pt–Ba–Ce/γ-Al2O3 催化剂，物理化学性质，NOx存储和还原，NOx 排放，H2 还原剂 1

RE-Si3N4 1

RLC网络；谐振性质；振荡特性；幅频特性 1

TRIP钢 1

Walsh循环谱 1

展开 ︾

检索范围：

排序： 展示方式：

Confinement properties of circular concrete columns wrapped with prefabricated textile-reinforced fine

《结构与土木工程前沿（英文）》 doi: 10.1007/s11709-023-0955-0

摘要： This paper proposes an innovative column composed of a core column (including both reinforced concrete (RC) and plain concrete (PC) columns) and a prefabricated textile-reinforced fine concrete (TRC) shell. To study the confinement properties of TRC shells on this novel type of concrete column, 20 circular specimens, including 12 PC columns and 8 RC columns, were prepared for axial compressive tests. Four key parameters, including the column size, reinforcing ratio of the carbon textile, concrete strength, and stirrup spacing, were evaluated. The results indicated that the compressive properties of the columns were improved by increasing the reinforcing ratio of the textile layers. In the case of TRC-confined PC columns, the maximum improvement in the peak load was 56.3%, and for TRC-confined RC columns, the maximum improvement was 60.2%. Based on the test results, an analytical model that can be used to calculate the stress–strain curves of prefabricated TRC shell-confined concrete columns has been proposed. The calculated curves predicted by the proposed model agreed well with the test results.

关键词： textile-reinforced fine concrete     prefabricated shell     confined concrete column     confinement properties     stress–strain relationship    

HTML PDF 收藏

Magnetic confinement fusion: a brief review

Chuanjun HUANG, Laifeng LI

《能源前沿（英文）》 2018年 第12卷 第2期   页码 305-313 doi: 10.1007/s11708-018-0539-1

摘要： Fusion energy is considered to be the ultimate energy source, which does not contribute to climate change compared with conventional fossil fuel. It is massive compared with unconventional renewable energy and demonstrates fewer safety features compared with unconventional fission energy. During the past several decades, never-ceasing efforts have been made to peacefully utilize the fusion energy in various approaches, especially inertial confinement and magnetic confinement. In this paper, the main developments of magnetic confinement fusion with emphasis on confinement systems as well as challenges of materials related to superconducting magnet and plasma-facing components are reviewed. The scientific feasibility of magnetic confinement fusion has been demonstrated in JET, TFTR, JT-60, and EAST, which instigates the construction of the International Thermonuclear Experimental Reactor (ITER). A fusion roadmap to DEMO and commercial fusion power plant has been established and steady progresses have been made to achieve the ultimate energy source.

关键词： fusion energy     magnetic confinement     tokamak     structural material     superconducting magnet    

HTML PDF 收藏

Confinement effects in methanol to olefins catalysed by zeolites: A computational review

German Sastre

《化学科学与工程前沿（英文）》 2016年 第10卷 第1期   页码 76-89 doi: 10.1007/s11705-016-1557-3

摘要： Small pore zeolites, containing 8-rings as the largest, are widely employed as catalysts in the process of methanol-to-olefins (MTO). Reactants and products diffuse with constraints through 8-rings and this is one of the reaction bottlenecks related to zeolite micropore topology. Small pore zeolites and silicon-aluminophosphates(SAPOs) containing cavities, where olefins are mainly formed through the hydrocarbon pool (HP) mechanism, are frequently tested for MTO. Shape selectivity of transition states within the side-chain methylation will be reviewed as this is one of the controlling steps of the MTO process, with particular attention to the role of hexamethylbenzene (HMB) and heptamethylbenzenium cation (HeptaMB ), which are the most tipically detected reaction intermediates, common to the paring and side-chain routes within the HP mechanism. The relative stability of these and other species will be reviewed in terms of confinement effects in different cage-based zeolites. The role of the different alkylating agents, methanol, dimethyl ether (DME), and surface methoxy species (SMS) will also be reviewed from the computational viewpoint.

关键词： small pore zeolites     SAPOs     methanol-to-olefins     hydrocarbon pool mechanism     alkylation of polymethylbenzenes    

HTML PDF 收藏

Engineering the electronic and geometric structure of VO/BN@TiO heterostructure for efficient aerobic oxidative desulfurization

《化学科学与工程前沿（英文）》 2023年 第17卷 第3期   页码 276-287 doi: 10.1007/s11705-022-2242-3

摘要： Particle size governs the electronic and geometric structure of metal nanoparticles (NPs), shaping their catalytic performances in heterogeneous catalysis. However, precisely controlling the size of active metal NPs and thereafter their catalytic activities remain an affordable challenge in ultra-deep oxidative desulfurization (ODS) field. Herein, a series of highly-efficient VOx/boron nitride nanosheets (BNNS)@TiO2 heterostructures, therein, cetyltrimethylammonium bromide cationic surfactants serving as intercalation agent, BNNS and MXene as precursors, with various VOx NP sizes were designed and controllably constructed by a facile intercalation confinement strategy. The properties and structures of the prepared catalysts were systematically characterized by different technical methods, and their catalytic activities were investigated for aerobic ODS of dibenzothiophene (DBT). The results show that the size of VOx NPs and V5+/V4+ play decisive roles in the catalytic aerobic ODS of VOx/BNNS@TiO2 catalysts and that VOx/BNNS@TiO2-2 exhibits the highest ODS activity with 93.7% DBT conversion within 60 min under the reaction temperature of 130 °C and oxygen flow rate of 200 mL·min–1, which is due to its optimal VOx dispersion, excellent reducibility and abundant active species. Therefore, the finding here may contribute to the fundamental understanding of structure-activity in ultra-deep ODS and inspire the advancement of highly-efficient catalyst.

关键词： oxidative desulfurization     boron nitride     vanadium     MXene     intercalation confinement    

HTML PDF 收藏

Effect of different high viscosity modifiers on rheological properties of high viscosity asphalt

《结构与土木工程前沿（英文）》 2021年 第15卷 第6期   页码 1390-1399 doi: 10.1007/s11709-021-0775-z

摘要： High viscosity asphalt (HVA) has been a great success as a drainage pavement material. However, the larger porosity of drainage asphalt mixtures weakens the cohesion and adhesion and leads to premature rutting, water damage, spalling and cracking. The purpose of this study was to investigate the rheological properties of HVA prepared using different high viscosity modifiers through conventional tests, Brookfield viscosity tests, dynamic shear rheometer tests and bending beam rheometer tests. The conventional performance results demonstrated SBS + rubber asphalt (SRA-1/2) exhibited excellent elastic recovery and low-temperature flexibility. The 60°C dynamic viscosity results indicated TPS + rubber asphalt (TRA) had the excellent adhesion. The rotational viscosity results and rheological results indicated that SRA-2 not only exhibited excellent temperature stability and workability, as well as excellent resistance to deformation and rutting resistance, but also exhibited excellent low-temperature cracking resistance and relaxation performance. Based on rheological results, the PG classification of HVA was 16% rubber + asphalt for PG76-22, 20% rubber + asphalt for PG88-22, TRA and SRA-1/2 for PG88-28. From comprehensive evaluation of the viscosity, temperature stability and sensitivity, as well as high/low temperature performance of HVA, SRA-2 was found to be more suited to the requirements of drainage asphalt pavement materials.

关键词： high viscosity asphalt     rheological properties     rubber     modifier     viscosity    

HTML PDF 收藏

LINKING CROP WATER PRODUCTIVITY TO SOIL PHYSICAL, CHEMICAL AND MICROBIAL PROPERTIES

《农业科学与工程前沿（英文）》 2021年 第8卷 第4期   页码 545-558 doi: 10.15302/J-FASE -2020349

摘要：

Agriculture uses a large proportion of global and regional water resources. Due to the rapid increase of population in the world, the increasing competition for water resources has led to an urgent need in increasing crop water productivity for agricultural sustainability. As the medium for crop growth, soils and their properties are important in affecting crop water productivity. This review examines the effects of soil physical, chemical, and microbial properties on crop water productivity and the quantitative relationships between them. A comprehensive view of these relationships may provide important insights for soil and water management in arable land for agriculture in the future.

 

关键词： crop water productivity     crop yield     soil chemical properties     soil microbial properties     soil physical properties     water consumption    

HTML PDF 收藏

Effect of earth reinforcement, soil properties and wall properties on bridge MSE walls

《结构与土木工程前沿（英文）》 2021年 第15卷 第5期   页码 1209-1221 doi: 10.1007/s11709-021-0764-2

摘要： Mechanically stabilized earth (MSE) retaining walls are popular for highway bridge structures. They have precast concrete panels attached to earth reinforcement. The panels are designed to have some lateral movement. However, in some cases, excessive movement and even complete dislocation of the panels have been observed. In this study, 3-D numerical modeling involving an existing MSE wall was undertaken to investigate various wall parameters. The effects of pore pressure, soil cohesion, earth reinforcement type and length, breakage/slippage of reinforcement and concrete strength, were examined. Results showed that the wall movement is affected by soil pore pressure and reinforcement integrity and length, and unaffected by concrete strength. Soil cohesion has a minor effect, while the movement increased by 13–20 mm for flexible geogrid reinforced walls compared with the steel grid walls. The steel grid stresses were below yielding, while the geogrid experienced significant stresses without rupture. Geogrid reinforcement may be used taking account of slippage resistance and wall movement. If steel grid is used, non-cohesive soil is recommended to minimize corrosion. Proper soil drainage is important for control of pore pressure.

关键词： mechanically stabilized earth walls     precast concrete panels     backfill soil     finite element modeling     earth reinforcement    

HTML PDF 收藏

Mechanical properties and microstructure of multilayer graphene oxide cement mortar

《结构与土木工程前沿（英文）》 2021年 第15卷 第4期   页码 1058-1070 doi: 10.1007/s11709-021-0747-3

摘要： This study reports on the effects of multilayer graphene oxide (MGO) on compressive strength, flexural strength, and microstructure of cement mortar. The cement mortar was prepared with type P. II. 52.5 Portland cement, standard sand, and MGO. Four mixes were prepared with inclusion of MGO (0%, 0.02%, 0.04%, and 0.06% by weight of cement). The testing result shows that the compressive of GO-cement mortar increased by 4.84%–13.42%, and the flexural strength increased by 4.37%–8.28% at 3 d. GO-cement mortar’s compressive strength and flexural strength at 7 d increased by 3.84%–12.08% and 2.54%–13.43%, respectively. MGO made little contribution to the increases of compressive strength and flexural strength of cement mortar at 28 d. The results of X-ray diffraction (XRD), scanning electron microscope (SEM), and nitrogen (N2) adsorption/desorption tests show that the types of hydration products and crystal grain size did not change after adding MGO. Still, it can help to improve the microstructure of the cement mortar via regulating hydration products and can provide more condensed cores to accelerate hydration. Furthermore, the regulating action of MGO for the microstructure of cement mortar at an early age was better than that at 28 d.

关键词： graphene oxide     cement     mortar     mechanical properties     microstructure    

HTML PDF 收藏

Innovative hybrid reinforcement constituting conventional longitudinal steel and FRP stirrups for improved seismic strength and ductility of RC structures

Mostafa FAKHARIFAR,Ahmad DALVAND,Mohammad K. SHARBATDAR,Genda CHEN,Lesley SNEED

《结构与土木工程前沿（英文）》 2016年 第10卷 第1期   页码 44-62 doi: 10.1007/s11709-015-0295-9

摘要： The use of fiber reinforced polymer (FRP) reinforcement is becoming increasingly attractive in construction of new structures. However, the inherent linear elastic behavior of FRP materials up to rupture is considered as a major drawback under seismic attacks when significant material inelasticity is required to dissipate the input energy through hysteretic cycles. Besides, cost considerations, including FRP material and construction of pre-fabricated FRP configurations, especially for stirrups, and probable damage to epoxy coated fibers when transported to the field are noticeable issues. The current research has proposed a novel economical hybrid reinforcement scheme for the next generation of infrastructures implementing on-site fabricated FRP stirrups comprised of FRP sheets. The hybrid reinforcement consists of conventional longitudinal steel reinforcement and FRP stirrups. The key feature of the proposed hybrid reinforcement is the enhanced strength and ductility owing to the considerable confining pressure provided by the FRP stirrups to the longitudinal steel reinforcement and core concrete. Reinforced concrete beam specimens and beam-column joint specimens were tested implementing the proposed hybrid reinforcement. The proposed hybrid reinforcement, when compared with conventional steel stirrups, is found to have higher strength, stiffness, and energy dissipation. Design methods, structural behavior, and applicability of the proposed hybrid reinforcement are discussed in detail in this paper.

关键词： FRP     ductility     confinement     seismic     shear    

HTML PDF 收藏

Synthesis, characterization and assessment thermal properties of clay based nanopigments

Mohammad Banimahd KIEVANI, Milad EDRAKI

《化学科学与工程前沿（英文）》 2015年 第9卷 第1期   页码 40-45 doi: 10.1007/s11705-015-1505-7

摘要： Nano-clay based pigments (NCP) are new type of pigments composed of organic dyes and layered silicate-clay nano-particles, and have already been used in polymeric coatings to improve mechanical thermal and stability properties. In this paper, the basic blue 41(BB41) was intercalated into Na - montmorillonite in an aqueous medium. The dye-intercalated montmorillonite was centrifuged, dried, and milled to prepare the nanopigment particles. X-ray diffraction showed an increase in the basal spacing, thus confirming intercalation of the BB41 molecules within the nanostructures of the interlayer spaces. Fourier transform infrared spectroscopy was used for identifying the functional groups and chemical bounding of Na -montmorillonite, BB41 and montmorillonite-BB41. The morphology of NCP was also studied by transmission electron microscopy. Finally, thermo-gravimetric analysis and differential thermograms suggested the thermal stability of the intercalated dye was improved.

关键词： nanopigment     layered silicate     cationic dye     thermal properties    

HTML PDF 收藏

Aging properties and aging mechanism of activated waste rubber powder modified asphalt binder based onrheological properties and micro-characterization

《结构与土木工程前沿（英文）》 2023年 第17卷 第4期   页码 625-636 doi: 10.1007/s11709-023-0938-1

摘要： The research and development of high-performance pavement materials has been intensified owing to the demand for long-life pavements. This study is performed to develop a novel pavement material using waste rubber powder, waste lubricating by-product (LBP), and asphalt. Subsequently, the aging properties and aging mechanism of activated waste rubber powder modified asphalt (ARMA) are investigated based on its rheological properties and micro-characterization. The rheological results show that, compared with waste rubber powder modified asphalt (RMA), ARMA offers a higher aging resistance and a longer fatigue life. A comparison and analysis of the rheological aging parameters of ARMA and RMA show that LBP activation diminishes the aging sensitivity of ARMA. The micro-characterization result shows that the aging of ARMA may be caused by the fact that LBP-activated waste rubber powder is more reactive and can form a dense colloidal structure with asphalt. Therefore, the evaporation loss of asphalt light components by heat and the damage to the colloidal structure by oxygen during the aging process are impeded, and the thermal-oxidative aging resistance of ARMA is improved.

关键词： rubber powder modified asphalt     aging     mechanism     rheological     characterization    

HTML PDF 收藏

Biological properties and clinical applications of berberine

Danyang Song, Jianyu Hao, Daiming Fan

《医学前沿（英文）》 2020年 第14卷 第5期   页码 564-582 doi: 10.1007/s11684-019-0724-6

摘要： Berberine, an isoquinoline alkaloid isolated from the Chinese herb and other plants, has a wide range of pharmacological properties. Berberine can be used to treat many diseases, such as cancer and digestive, metabolic, cardiovascular, and neurological diseases. Berberine has protective capacities in digestive diseases. It can inhibit toxins and bacteria, including , protect the intestinal epithelial barrier from injury, and ameliorate liver injury. Berberine also inhibits the proliferation of various types of cancer cells and impedes invasion and metastasis. Recent evidence has confirmed that berberine improves the efficacy and safety of chemoradiotherapies. In addition, berberine regulates glycometabolism and lipid metabolism, improves energy expenditure, reduces body weight, and alleviates nonalcoholic fatty liver disease. Berberine also improves cardiovascular hemodynamics, suppresses ischemic arrhythmias, attenuates the development of atherosclerosis, and reduces hypertension. Berberine shows potent neuroprotective effects, including antioxidative, antiapoptotic, and anti-ischemic. Furthermore, berberine exerts protective effects against other diseases. The mechanisms of its functions have been extensively explored, but much remains to be clarified. This article summarizes the main pharmacological actions of berberine and its mechanisms in cancer and digestive, metabolic, cardiovascular, and neurological diseases.

关键词： berberine     Coptis chinensis     pharmacological properties     mechanism     clinical applications    

HTML PDF 收藏

Mechanical properties of vanadium-alloyed austempered ductile iron for crankshaft applications

《机械工程前沿（英文）》 2023年 第18卷 第3期 doi: 10.1007/s11465-023-0746-2

摘要： This study focused on the development of austempered ductile iron (ADI) with desirable combination of mechanical properties for crankshaft applications by the combined effect of vanadium (V) alloying and an optimized heat treatment process. The produced unalloyed GGG60, 0.15% V-alloyed GGG60 (V-15), and 0.30% V-alloyed GGG60 samples were subjected to austenitizing at 900 °C for 1 h and subsequent austempering processes at 250, 300, and 350 °C for 15, 30, 60, 90, and 180 min. As a result of these austempering processes, different bainitic structures were obtained, which led to the formation of diverse combinations of mechanical properties. The mechanical properties of the austempered samples were tested comprehensively, and the results were correlated with their microstructures and the stability of the retained austenite phases. From the microstructural observations, the V-alloyed samples exhibited a finer microstructure and a more acicular ferrite phase than unalloyed samples. The V addition delayed the coarsening of the acicular ferrite structures and considerably contributed to the improvement of the mechanical properties of GGG60. Moreover, the X-ray diffraction results revealed that the retained austenite volume and the carbon enrichment of austenite phases in ADI samples were remarkably affected by the addition of vanadium. The increase in volume fraction of retained austenite and its carbon content provided favorable ductility and toughness to V-15, as confirmed by the elongation and impact test results. Consequently, the dual-phase ausferrite microstructure of V-15 that was austempered at 300 °C for 60 min exhibited high strength with substantial ductility and toughness for crankshaft applications.

关键词： austempered ductile iron (ADI)     vanadium alloying     mechanical properties     crankshafts     retained austenite    

HTML PDF 收藏

Assessment and prediction of the mechanical properties of ternary geopolymer concrete

Jinliang LIU; Wei ZHAO; Xincheng SU; Xuefeng XIE

《结构与土木工程前沿（英文）》 2022年 第16卷 第11期   页码 1436-1452 doi: 10.1007/s11709-022-0889-y

摘要： This paper utilized granulated blast furnace slag (GBFS), fly ash (FA), and zeolite powder (ZP) as the binders of ternary geopolymer concrete (TGC) activated with sodium silicate solution. The effects of alkali content (AC) and alkaline activator modulus (AAM) on the compressive strength, flexural tensile strength and elastic modulus of TGC were tested and the SEM micrographs were investigated. The experimental results were then compared with the predictions based on models of mechanical properties, and the amended models of TGC were proposed taking account of the effects of AC and AAM. The results indicated that increasing AC and reducing AAM which were in the specific ranges (5% to 7% and 1.1 to 1.5, respectively) had positive effects on the mechanical properties of TGC. In addition, the flexural tensile strength of TGC was 27.7% higher than that of OPC at the same compressive strength, while the elastic modulus of TGC was 25.8% lower than that of OPC. Appropriate prediction models with the R2 of 0.945 and 0.987 for predicting flexural tensile strength and elastic modulus using compressive strength, respectively, were proposed. Fitting models, considering the effects of AC and AAM, were also proposed to predict the mechanical properties of TGC.

关键词： Ternary Geopolymer Concrete (TGC)     alkaline activator modulus     alkali content     mechanical properties     assessment    

HTML PDF 收藏

Molecular dynamics investigation of mechanical properties of single-layer phagraphene

Ali Hossein Nezhad SHIRAZI

《结构与土木工程前沿（英文）》 2019年 第13卷 第2期   页码 495-503 doi: 10.1007/s11709-018-0492-4

摘要： Phagraphene is a very attractive two-dimensional (2D) full carbon allotrope with very interesting mechanical, electronic, optical, and thermal properties. The objective of this study is to investigate the mechanical properties of this new graphene like 2D material. In this work, mechanical properties of phagraphene have been studied not only in the defect-free form, but also with the critical defect of line cracks, using the classical molecular dynamics simulations. Our study shows that the pristine phagraphene in zigzag direction experience a ductile behavior under uniaxial tensile loading and the nanosheet in this direction are less sensitive to temperature changes as compared to the armchair direction. We studied different crack lengths to explore the influence of defects on the mechanical properties of phagraphene. We also investigated the temperature effect on the mechanical properties of pristine and defective phagraphene. Our classical atomistic simulation results confirm that larger cracks can reduce the strength of the phagraphene. Moreover, it was shown the temperature has a considerable weakening effect on the tensile strength of phagraphene. The results of this study may be useful for the design of nano-devices using the phagraphene.

关键词： phaqraphene     mechanical properties     crack propaqation     molecular dynamics     thermal effects    

HTML PDF 收藏

标题 作者 时间 类型 操作

Confinement properties of circular concrete columns wrapped with prefabricated textile-reinforced fine

期刊论文

Magnetic confinement fusion: a brief review

Chuanjun HUANG, Laifeng LI

期刊论文

Confinement effects in methanol to olefins catalysed by zeolites: A computational review

German Sastre

期刊论文

Engineering the electronic and geometric structure of VO/BN@TiO heterostructure for efficient aerobic oxidative desulfurization

期刊论文

Effect of different high viscosity modifiers on rheological properties of high viscosity asphalt

期刊论文

LINKING CROP WATER PRODUCTIVITY TO SOIL PHYSICAL, CHEMICAL AND MICROBIAL PROPERTIES

期刊论文

Effect of earth reinforcement, soil properties and wall properties on bridge MSE walls

期刊论文

Mechanical properties and microstructure of multilayer graphene oxide cement mortar

期刊论文

Innovative hybrid reinforcement constituting conventional longitudinal steel and FRP stirrups for improved seismic strength and ductility of RC structures

Mostafa FAKHARIFAR,Ahmad DALVAND,Mohammad K. SHARBATDAR,Genda CHEN,Lesley SNEED

期刊论文

Synthesis, characterization and assessment thermal properties of clay based nanopigments

Mohammad Banimahd KIEVANI, Milad EDRAKI

期刊论文

Aging properties and aging mechanism of activated waste rubber powder modified asphalt binder based onrheological properties and micro-characterization

期刊论文

Biological properties and clinical applications of berberine

Danyang Song, Jianyu Hao, Daiming Fan

期刊论文

Mechanical properties of vanadium-alloyed austempered ductile iron for crankshaft applications

期刊论文

Assessment and prediction of the mechanical properties of ternary geopolymer concrete

Jinliang LIU; Wei ZHAO; Xincheng SU; Xuefeng XIE

期刊论文

Molecular dynamics investigation of mechanical properties of single-layer phagraphene

Ali Hossein Nezhad SHIRAZI

期刊论文